Safety Regarding Automobiles

There are three main statistics to which automobile safety can be compared: (Data taken from UK transportation)

Deaths per
billion journeys

Bus: 4.3
Rail: 20
Van: 20
Car: 40
Foot: 40
Water: 90
Air: 117
Bicycle: 170
Motorcycle: 1640
Deaths per
billion hours

Bus: 11.1
Rail: 30
Air: 30.8
Water: 50
Van: 60
Car: 130
Foot: 220
Bicycle: 550
Motorcycle: 4840
Deaths per
billion kilometres

Air: 0.05
Bus: 0.4
Rail: 0.6
Van: 1.2
Water: 2.6
Car: 3.1
Bicycle: 44.6
Foot: 54.2
Motorcycle: 108.9

While road traffic injuries represent the leading cause in worldwide injury-related deaths, their popularity undermines this statistic.

Mary Ward became one of the first documented automobile fatalities in 1869 in Parsonstown, Ireland and Henry Bliss one of the United States' first pedestrian automobile casualties in 1899 in New York. There are now standard tests for safety in new automobiles, like the Euro NCAP and the US NCAP tests, as well as insurance-backed IIHS tests.

Alternatives to the Automobiles

Established alternatives for some aspects of automobile use include public transit (buses, trolleybuses, trains, subways, monorails, tramways), cycling, walking, rollerblading, skateboarding, horseback riding and using a velomobile. Car-share arrangements and carpooling are also increasingly popular–the U.S. market leader in car-sharing has experienced double-digit growth in revenue and membership growth between 2006 and 2007, offering a service that enables urban residents to "share" a vehicle rather than own a car in already congested neighborhoods. Bike-share systems have been tried in some European cities, including Copenhagen and Amsterdam. Similar programs have been experimented with in a number of U.S. Cities. Additional individual modes of transport, such as personal rapid transit could serve as an alternative to automobiles if they prove to be socially accepted.

Future Automobiles Technologies

Automobile propulsion technology under development include gasoline/electric and plug-in hybrids, battery electric vehicles, hydrogen cars, biofuels, and various alternative fuels.

Research into future alternative forms of power include the development of fuel cells, Homogeneous Charge Compression Ignition (HCCI), stirling engines, and even using the stored energy of compressed air or liquid nitrogen.

New materials which may replace steel car bodies include duraluminum, fiberglass, carbon fiber, and carbon nanotubes.

Telematics technology is allowing more and more people to share cars, on a pay-as-you-go basis, through such schemes as City Car Club in the UK, Mobility in mainland Europe, and Zipcar in the US.

Environmental Impact of Automobiles

Transportation is a major contributor to air pollution in most industrialised nations. According to the American Surface Transportation Policy Project nearly half of all Americans are breathing unhealthy air. Their study showed air quality in dozens of metropolitan areas has worsened over the last decade. In the United States the average passenger car emits 11,450 lbs (5 tonnes) of carbon dioxide, along with smaller amounts of carbon monoxide, hydrocarbons, and nitrogen.

Animals and plants are often negatively impacted by automobiles via habitat destruction and pollution. Over the lifetime of the average automobile the "loss of habitat potential" may be over 50,000 square meters (538,195 square feet) based on Primary production correlations.

Fuel taxes may act as an incentive for the production of more efficient, hence less polluting, car designs (e.g. hybrid vehicles) and the development of alternative fuels. High fuel taxes may provide a strong incentive for consumers to purchase lighter, smaller, more fuel-efficient cars, or to not drive. On average, today's automobiles are about 75 percent recyclable, and using recycled steel helps reduce energy use and pollution. In the United States Congress, federally mandated fuel efficiency standards have been debated regularly, passenger car standards have not risen above the 27.5 miles per US gallon (8.55 L/100 km; 33.0 mpg-imp) standard set in 1985. Light truck standards have changed more frequently, and were set at 22.2 miles per US gallon (10.6 L/100 km; 26.7 mpg-imp) in 2007.Alternative fuel vehicles are another option that is less polluting than conventional petroleum powered vehicles.

Residents of low-density, residential-only sprawling communities are also more likely to die in car collisions which kill 1.2 million people worldwide each year, and injure about forty times this number. Sprawl is more broadly a factor in inactivity and obesity, which in turn can lead to increased risk of a variety of diseases.

Costs and Benefits of Automobiles

The costs of automobile usage, which may include the cost of: acquiring the vehicle, repairs, maintenance, fuel, depreciation, parking fees, tire replacement, taxes and insurance,[24] are weighed against the cost of the alternatives, and the value of the benefits - perceived and real - of vehicle usage. The benefits may include on-demand transportation, mobility, independence and convenience.
Similarly the costs to society of encompassing automobile use, which may include those of: maintaining roads, land use, pollution, public health, health care, and of disposing of the vehicle at the end of its life, can be balanced against the value of the benefits to society that automobile use generates. The societal benefits may include: economy benefits, such as job and wealth creation, of automobile production and maintenance, transportation provision, society wellbeing derived from leisure and travel opportunities, and revenue generation from the tax opportunities. The ability for humans to move flexibly from place to place has far reaching implications for the nature of societies.

Rocket and Jet Automobiles

A rocket car holds the record in drag racing. However, the fastest of those cars are used to set the Land Speed Record, and are propelled by propulsive jets emitted from rocket, turbojet, or more recently and most successfully turbofan engines. The ThrustSSC car using two Rolls-Royce Spey turbofans with reheat was able to exceed the speed of sound at ground level in 1997.

Rotary (Wankel) Engine Automobiles

Rotary Wankel engines were introduced into road cars by NSU with the Ro 80 and later were seen in the Citroën GS Birotor and several Mazda models. In spite of their impressive smoothness, poor reliability and fuel economy has largely lead to their decline. Mazda, beginning with the R100 then RX-2, has continued research on these engines, overcoming most of the earlier problems with the RX-7 and RX-8.

Gas turbine Engine Automobiles

In the 1950s there was a brief interest in using gas turbine engines and several makers including Rover and Chrysler produced prototypes. In spite of the power units being very compact, high fuel consumption, severe delay in throttle response, and lack of engine braking meant no cars reached production.

Compressed Air Engine Automobiles

A compressed air car is an alternative fuel car that uses a motor powered by compressed air. The car can be powered solely by air, or by air combined (as in a hybrid electric vehicle) with gasoline/diesel/ethanol or electric plant and regenerative braking. Instead of mixing fuel with air and burning it to drive pistons with hot expanding gases; compressed air cars use the expansion of compressed air to drive their pistons. Several prototypes are available already and scheduled for worldwide sale by the end of 2008, though this has not happened as of January 2009. Companies releasing this type of car include Tata Motors and Motor Development International (MDI).

Steam Engine Automobiles

Steam power, usually using an oil- or gas-heated boiler, was also in use until the 1930s but had the major disadvantage of being unable to power the car until boiler pressure was available (although the newer models could achieve this in well under a minute). It has the advantage of being able to produce very low emissions as the combustion process can be carefully controlled. Its disadvantages include poor heat efficiency and extensive requirements for electric auxiliaries.

Oxyhydrogen Engine Automobiles

Oxyhydrogen is another fuel that can be used in existing internal combustion engines originally developed for using gasoline. This allows the engine to eliminate emissions, although fuel efficiency is reduced rather than improved (since the energy required to split water exceeds the energy recouped by burning it).

Hydrogen Engine Automobiles

Hydrogen is a fuel that, upon consumption, does not emit any greenhouse gases. Hydrogen can be burned in internal combustion engines as well as fuel cells.

Electric Engine Automobiles

The first electric cars were built around 1832, well before internal combustion powered cars appeared. For a period of time electrics were considered superior due to the silent nature of electric motors compared to the very loud noise of the gasoline engine. This advantage was removed with Hiram Percy Maxim's invention of the muffler in 1897. Thereafter internal combustion powered cars had two critical advantages: 1) long range and 2) high specific energy (far lower weight of petrol fuel versus weight of batteries). The building of battery electric vehicles that could rival internal combustion models had to wait for the introduction of modern semiconductor controls and improved batteries. Because they can deliver a high torque at low revolutions electric cars do not require such a complex drive train and transmission as internal combustion powered cars. Some post-2000 electric car designs such as the Venturi Fétish are able to accelerate from 0-60 mph (96 km/h) in 4.0 seconds with a top speed around 130 mph (210 km/h). Others have a range of 250 miles (400 km) on the United States Environmental Protection Agency (EPA) highway cycle requiring 3-1/2 hours to completely charge. Equivalent fuel efficiency to internal combustion is not well defined but some press reports give it at around 135 miles per US gallon (1.74 L/100 km; 162 mpg-imp).

Biofuels Engine Automobiles

Ethanol, other alcohol fuels (biobutanol) and biogasoline have widespread use as an automotive fuel. Most alcohols have less energy per liter than gasoline and are usually blended with gasoline. Alcohols are used for a variety of reasons - to increase octane, to improve emissions, and as an alternative to petroleum based fuel, since they can be made from agricultural crops. Brazil's ethanol program provides about 20% of the nation's automotive fuel needs, as a result of the mandatory use of E25 blend of gasoline throughout the country, 3 million cars that operate on pure ethanol, and 6 million dual or flexible-fuel vehicles sold since 2003. that run on any mix of ethanol and gasoline. The commercial success of "flex" vehicles, as they are popularly known, have allowed sugarcane based ethanol fuel to achieve a 50% market share of the gasoline market by April 2008.

Gasoline Engine Automobiles

Gasoline engines have the advantage over diesel in being lighter and able to work at higher rotational speeds and they are the usual choice for fitting in high-performance sports cars. Continuous development of gasoline engines for over a hundred years has produced improvements in efficiency and reduced pollution. The carburetor was used on nearly all road car engines until the 1980s but it was long realised better control of the fuel/air mixture could be achieved with fuel injection. Indirect fuel injection was first used in aircraft engines from 1909, in racing car engines from the 1930s, and road cars from the late 1950s. Gasoline Direct Injection (GDI) is now starting to appear in production vehicles such as the 2007 (Mark II) BMW Mini. Exhaust gases are also cleaned up by fitting a catalytic converter into the exhaust system. Clean air legislation in many of the car industries most important markets has made both catalysts and fuel injection virtually universal fittings. Most modern gasoline engines also are capable of running with up to 15% ethanol mixed into the gasoline - older vehicles may have seals and hoses that can be harmed by ethanol. With a small amount of redesign, gasoline-powered vehicles can run on ethanol concentrations as high as 85%. 100% ethanol is used in some parts of the world (such as Brazil), but vehicles must be started on pure gasoline and switched over to ethanol once the engine is running. Most gasoline engined cars can also run on LPG with the addition of an LPG tank for fuel storage and carburettor modifications to add an LPG mixer. LPG produces fewer toxic emissions and is a popular fuel for fork-lift trucks that have to operate inside buildings

Petrol Engine Automobiles

A petrol engine (known as a gasoline engine in North America) is an internal combustion engine with spark-ignition, designed to run on petrol (gasoline) and similar volatile fuels.

It differs from a diesel engine in the method of mixing the fuel and air, and in the fact that it uses spark plugs to initiate the combustion process. In a diesel engine, only air is compressed (and therefore heated), and the fuel is injected into the now very hot air at the end of the compression stroke, and self-ignites. In a petrol engine, the fuel and air are usually pre-mixed before compression (although some modern petrol engines now use cylinder-direct petrol injection). The pre-mixing was formerly done in a carburetor, but now (except in the smallest engines) it is done by electronically-controlled fuel injection. Pre-mixing of fuel and air allows a petrol engine to run at a much higher speed than a diesel, but severely limits their compression, and thus efficiency.

Diesel Engine Automobiles

Diesel-engined cars have long been popular in Europe with the first models being introduced as early as 1922 by Peugeot and the first production car, Mercedes-Benz 260 D in 1936 by Mercedes-Benz. The main benefit of diesel engines is a 50% fuel burn efficiency compared with 27% in the best gasoline engines. A down-side of the Diesel engine is that better filters are required to reduce the presence in the exhaust gases of fine soot particulates called diesel particulate matter. Manufacturers are now starting to fit diesel particulate filters to remove the soot. Many diesel-powered cars can run with little or no modifications on 100% biodiesel and combinations of other organic oils.

Automobile propulsion technologies

Most automobiles in use today are propelled by gasoline (also known as petrol) or diesel internal combustion engines, which are known to cause air pollution and are also blamed for contributing to climate change and global warming. Increasing costs of oil-based fuels, tightening environmental laws and restrictions on greenhouse gas emissions are propelling work on alternative power systems for automobiles. Efforts to improve or replace existing technologies include the development of hybrid vehicles, and electric and hydrogen vehicles which do not release pollution into the air.

Automotive industry crisis of 2008–2010

The automotive industry crisis of 2008–2010 was a part of a global financial downturn. The crises affected European and Asian automobile manufacturers, but it was primarily felt in the American automobile manufacturing industry. The downturn also affected Canada by virtue of the Automotive Products Trade Agreement.

The automotive industry was weakened by a substantial increase in the prices of automotive fuels linked to the 2003-2008 energy crisis which discouraged purchases of sport utility vehicles (SUVs) and pickup trucks which have low fuel economy. The popularity and relatively high profit margins of these vehicles had encouraged the American "Big Three" automakers, General Motors, Ford, and Chrysler to make them their primary focus. With few fuel-efficient models to offer to consumers, sales began to slide. By 2008, the situation had turned critical as the credit crunch placed pressure on the prices of raw materials.

Car companies from Asia, Europe, North America, and elsewhere have implemented creative marketing strategies to entice reluctant consumers as most experienced double-digit percentage declines in sales. Major manufacturers, including the Big Three and Toyota offered substantial discounts across their lineups. The Big Three faced criticism for their lineups, which were seen to be irresponsible in light of rising fuel prices. North American consumers turned to higher-quality and more fuel-efficient product of Japanese and European automakers. However, many of the vehicles perceived to be foreign were actually "transplants," foreign cars manufactured or assembled in the United States, at lower cost than true imports.

Automotive industry

The automotive industry designs, develops, manufactures, markets, and sells the world's motor vehicles. In 2008, more than 70 million motor vehicles, including cars and commercial vehicles were produced worldwide.

In 2007, a total of 71.9 million new automobiles were sold worldwide: 22.9 million in Europe, 21.4 million in Asia-Pacific, 19.4 million in USA and Canada, 4.4 million in Latin America, 2.4 million in the Middle East and 1.4 million in Africa. The markets in North America and Japan were stagnant, while those in South America and other parts of Asia grew strongly. Of the major markets, China, Russia, Brazil and India saw the most rapid growth.

About 250 million vehicles are in use in the United States. Around the world, there were about 806 million cars and light trucks on the road in 2007; they burn over 260 billion gallons of gasoline and diesel fuel yearly. The numbers are increasing rapidly, especially in China and India. In the opinion of some, urban transport systems based around the car have proved unsustainable, consuming excessive energy, affecting the health of populations, and delivering a declining level of service despite increasing investments. Many of these negative impacts fall disproportionately on those social groups who are also least likely to own and drive cars. The sustainable transport movement focuses on solutions to these problems.

In 2008, with rapidly rising oil prices, industries such as the automotive industry, are experiencing a combination of pricing pressures from raw material costs and changes in consumer buying habits. The industry is also facing increasing external competition from the public transport sector, as consumers re-evaluate their private vehicle usage. Roughly half of the US's fifty-one light vehicle plants are projected to permanently close in the coming years, with the loss of another 200,000 jobs in the sector, on top of the 560,000 jobs lost this decade. Combined with robust growth in China, in 2009, this resulted in China becoming the largest automobile producer and market in the world.

Production of Automobiles

The large-scale, production-line manufacturing of affordable automobiles was debuted by Ransom Olds at his Oldsmobile factory in 1902. This concept was greatly expanded by Henry Ford, beginning in 1914.

As a result, Ford's cars came off the line in fifteen minute intervals, much faster than previous methods, increasing productivity eightfold (requiring 12.5 man-hours before, 1 hour 33 minutes after), while using less manpower. It was so successful, paint became a bottleneck. Only Japan black would dry fast enough, forcing the company to drop the variety of colors available before 1914, until fast-drying Duco lacquer was developed in 1926. This is the source of Ford's apocryphal remark, "any color as long as it's black". In 1914, an assembly line worker could buy a Model T with four months' pay.

Ford's complex safety procedures—especially assigning each worker to a specific location instead of allowing them to roam about—dramatically reduced the rate of injury. The combination of high wages and high efficiency is called "Fordism," and was copied by most major industries. The efficiency gains from the assembly line also coincided with the economic rise of the United States. The assembly line forced workers to work at a certain pace with very repetitive motions which led to more output per worker while other countries were using less productive methods.

In the automotive industry, its success was dominating, and quickly spread worldwide seeing the founding of Ford France and Ford Britain in 1911, Ford Denmark 1923, Ford Germany 1925; in 1921, Citroen was the first native European manufacturer to adopt the production method. Soon, companies had to have assembly lines, or risk going broke; by 1930, 250 companies which did not, had disappeared.

Development of automotive technology was rapid, due in part to the hundreds of small manufacturers competing to gain the world's attention. Key developments included electric ignition and the electric self-starter (both by Charles Kettering, for the Cadillac Motor Company in 1910-1911), independent suspension, and four-wheel brakes.Since the 1920s, nearly all cars have been mass-produced to meet market needs, so marketing plans often have heavily influenced automobile design. It was Alfred P. Sloan who established the idea of different makes of cars produced by one company, so buyers could "move up" as their fortunes improved.

Reflecting the rapid pace of change, makes shared parts with one another so larger production volume resulted in lower costs for each price range. For example, in the 1930s, LaSalles, sold by Cadillac, used cheaper mechanical parts made by Oldsmobile; in the 1950s, Chevrolet shared hood, doors, roof, and windows with Pontiac; by the 1990s, corporate drivetrains and shared platforms (with interchangeable brakes, suspension, and other parts) were common. Even so, only major makers could afford high costs, and even companies with decades of production, such as Apperson, Cole, Dorris, Haynes, or Premier, could not manage: of some two hundred American car makers in existence in 1920, only 43 survived in 1930, and with the Great Depression, by 1940, only 17 of those were left.

In Europe much the same would happen. Morris set up its production line at Cowley in 1924, and soon outsold Ford, while beginning in 1923 to follow Ford's practise of vertical integration, buying Hotchkiss (engines), Wrigley (gearboxes), and Osberton (radiators), for instance, as well as competitors, such as Wolseley: in 1925, Morris had 41% of total British car production. Most British small-car assemblers, from Abbey to Xtra had gone under. Citroen did the same in France, coming to cars in 1919; between them and other cheap cars in reply such as Renault's 10CV and Peugeot's 5CV, they produced 550,000 cars in 1925, and Mors, Hurtu, and others could not compete.[16] Germany's first mass-manufactured car, the Opel 4PS Laubfrosch (Tree Frog), came off the line at Russelsheim in 1924, soon making Opel the top car builder in Germany, with 37.5% of the market.

Modern era

The modern era is normally defined as the 25 years preceding the current year. However, there are some technical and design aspects that differentiate modern cars from antiques. Without considering the future of the car, the modern era has been one of increasing standardisation, platform sharing, and computer-aided design.

Some particularly notable advances in modern times are the widespread of front-wheel drive and all-wheel drive, the adoption of the V6 engine configuration, and the ubiquity of fuel injection. While all of these advances were first attempted in earlier eras, they so dominate the market today that it is easy to overlook their significance. Nearly all modern passenger cars are front-wheel drive monocoque/unibody designs, with transversely-mounted engines, but this design was considered radical as late as the 1960s.

Body styles have changed as well in the modern era. Three types, the hatchback, minivan, and sport utility vehicle, dominate today's market,[citation needed] yet are relatively recent concepts. All originally emphasised practicality, but have mutated into today's high-powered luxury crossover SUV and sports wagon. The rise of pickup trucks in the United States, and SUVs worldwide has changed the face of motoring, with these "trucks" coming to command more than half of the world automobile market.

The modern era has also seen rapidly rising fuel efficiency and engine output. Once the automobile emissions concerns of the 1970s were conquered with computerised engine management systems, power began to rise rapidly. In the 1980s, a powerful sports car might have produced 200 horsepower (150 kW) — just 20 years later, average passenger cars have engines that powerful, and some performance models offer three times as much power.

Exemplary modern cars:

1966–present Toyota Corolla — a simple small Japanese saloon/sedan that has come to be the best-selling car of all time.
1967 NSU Ro 80 — the basic wedge profile of this design was much emulated in subsequent decades.
1970–present Range Rover — the first take on the combination of luxury and four-wheel drive utility, the original 'SUV'. Such was the popularity of the original Range Rover Classic that a new model was not brought out until 1996.
1973–present Mercedes-Benz S-Class — electronic Anti-lock Braking System, supplemental restraint airbags, seat belt pretensioners, and electronic traction control system all made their debut on the S-Class. These features would later become standard throughout the car industry.
1975–present BMW 3 Series — the 3 Series has been on Car and Driver magazine's annual Ten Best list 17 times, making it the longest running entry in the list.
1977–present Honda Accord saloon/sedan — this Japanese sedan became the most popular car in the United States in the 1990s, pushing the Ford Taurus aside, and setting the stage for today's upscale Asian sedans.
1981–1989 Dodge Aries and Plymouth Reliant — the "K-cars" that saved Chrysler as a major manufacturer. These models were some of the first successful American front-wheel drive, fuel-efficient compact cars.
1983–present Chrysler minivans — the two-box minivan design nearly pushed the station wagon out of the market, and presaged today's crossover SUVs.
1986–present Ford Taurus — this mid-sized front-wheel drive sedan with modern computer-assisted design dominated the American market in the late 1980s, and created a design revolution in North America.

Post-war era

Automobile design finally emerged from the shadow of World War II in 1949, the year that in the United States saw the introduction of high-compression V8 engines and modern bodies from General Motors' Oldsmobile and Cadillac brands. The unibody/strut-suspended 1951 Ford Consul joined the 1948 Morris Minor and 1949 Rover P4 in waking up the automobile market in the United Kingdom. In Italy, Enzo Ferrari was beginning his 250 series, just as Lancia introduced the revolutionary V6-powered Aurelia.

Throughout the 1950s, engine power and vehicle speeds rose, designs became more integrated and artful, and cars spread across the world. Alec Issigonis' Mini and Fiat's 500 diminutive cars swept Europe, while the similar kei car class put Japan on wheels for the first time. The legendary Volkswagen Beetle survived Hitler's Germany to shake up the small-car market in the Americas. Ultra luxury, exemplified in America by the Cadillac Eldorado Brougham, reappeared after a long absence, and grand tourers (GT), like the Ferrari Americas, swept across Europe.

The market changed somewhat in the 1960s, as Detroit began to worry about foreign competition, the European makers adopted ever-higher technology, and Japan appeared as a serious car-producing nation. General Motors, Chrysler, and Ford tried radical small cars, like the GM A-bodies, but had little success. Captive imports and badge engineering swept through the US and UK as conglomerates like the British Motor Corporation consolidated the market. BMC's revolutionary space-saving Mini, which first appeared in 1959, captured large sales worldwide. Minis were marketed under the Austin and Morris names, until Mini became a marque in its own right in 1969. The trend for corporate consolidation reached Italy as niche makers like Maserati, Ferrari, and Lancia were acquired by larger companies. By the end of the decade, the number of automobile marques had been greatly reduced.

In America, performance became a prime focus of marketing, exemplified by pony cars and muscle cars. In 1964 the popular Ford Mustang appeared. In 1967, Chevrolet released the Camaro to compete with the Mustang. But everything changed in the 1970s as the 1973 oil crisis, automobile emissions control rules, Japanese and European imports, and stagnant innovation wreaked havoc on the American industry. Though somewhat ironically, full-size sedans staged a major comeback in the years between the energy crisis, with makes such as Cadillac and Lincoln staging their best sales years ever in the late 70s. Small performance cars from BMW, Toyota, and Nissan took the place of big-engined cars from America and Italy.

On the technology front, the biggest developments of the era were the widespread use of independent suspensions, wider application of fuel injection, and an increasing focus on safety in the design of automobiles. The hottest technologies of the 1960s were NSU's "Wankel engine", the gas turbine, and the turbocharger. Of these, only the last, pioneered by General Motors but popularised by BMW and Saab, was to see widespread use. Mazda had much success with its "Rotary" engine which, however, acquired a reputation as a polluting gas-guzzler. Other Wankel licensees, including Mercedes-Benz and General Motors, never put their designs into production after the 1973 oil crisis. (Mazda's hydrogen-fuelled successor was later to demonstrate potential as an "ultimate eco-car". Rover and Chrysler both produced experimental gas turbine cars to no effect.

Cuba is famous for retaining its pre-1959 cars, known as yank tanks or maquinas, which have been kept since the Cuban revolution when the influx of new cars slowed because of a US trade embargo.Exemplary post-war cars:

1948–1971 Morris Minor — a popular, and typical post-war car exported around the world.
1959–2000 Mini — this quintessential small car lasted for four decades, and is one of the most famous cars of all time.
1961–1975 Jaguar E-type — the E-type saved Jaguar on the track and in the showroom, and was a standard for design and innovation in the 1960s.
1964–present Ford Mustang — the pony car that became one of the best-selling and most-collected cars of the era.
1969 Datsun 240Z — one of the first Japanese sports cars to be a smash hit with the North American public, it paved the way for future decades of Japanese strength in the automotive industry. It was affordable, well built, and had great success both on the track and in the showroom.

Pre-WWII era

The pre-war part of the classic era began with the Great Depression in 1930, and ended with the recovery after World War II, commonly placed at 1948. It was in this period that integrated fenders and fully-closed bodies began to dominate sales, with the new saloon/sedan body style even incorporating a trunk or boot at the rear for storage. The old open-top runabouts, phaetons and touring cars were phased out by the end of the classic era as wings, running boards, and headlights were gradually integrated with the body of the car.

By the 1930s, most of the mechanical technology used in today's automobiles had been invented, although some things were later "re-invented", and credited to someone else. For example, front-wheel drive was re-introduced by André Citroën with the launch of the Traction Avant in 1934, though it had appeared several years earlier in road cars made by Alvis and Cord, and in racing cars by Miller (and may have appeared as early as 1897). After 1930, the number of auto manufacturers declined sharply as the industry consolidated and matured.

Exemplary pre-war automobiles:

1932–1939 Alvis Speed 20 and Speed 25 — the first cars with all-synchromesh gearbox.
1932–1948 Ford V-8 — introduction of the powerful Flathead V8 in mainstream vehicles, setting new performance and efficiency standards.
1934–1940 Bugatti Type 57 — a singular high-tech, refined automobile for the wealthy.
1934–1956 Citroën Traction Avant — the first mass-produced front-wheel drive car, built with monocoque techniques.
1936–1955 MG T series — sports cars with youth appeal at an affordable price.
1938–2003 Volkswagen Beetle — a design for efficiency and low price, which progressed over 60 years with minimal basic change.
1936–1939 Rolls-Royce Phantom III — V12 engined pinnacle of pre-war engineering, with technological advances not seen in most other manufacturers until the 1960s. Superior performance and quality.

Vintage era

The vintage era lasted from the end of World War I (1919), through the Wall Street Crash at the end of 1929. During this period, the front-engined car came to dominate, with closed bodies and standardised controls becoming the norm. In 1919, 90% of cars sold were open; by 1929, 90% were closed. Development of the internal combustion engine continued at a rapid pace, with multi-valve and overhead camshaft engines produced at the high end, and V8, V12, and even V16 engines conceived for the ultra-rich.

Exemplary vintage vehicles:

1922–1939 Austin 7 — the Austin Seven was one of the most widely copied vehicles ever, serving as a template for cars around the world, from BMW to Nissan.
1924–1929 Bugatti Type 35 — the Type 35 was one of the most successful racing cars of all time, with over 1,000 victories in five years.
1922–1931 Lancia Lambda — very advanced car for the time, first car to feature a load-bearing monocoque-type body and independent front suspension.
1925–1928 Hanomag 2 / 10 PS — early example of envelope styling, without separate fenders (wings) and running boards.
1927–1931 Ford Model A (1927-1931) — after keeping the brass era Model T in production for too long, Ford broke from the past by restarting its model series with the 1927 Model A. More than 4 million were produced, making it the best-selling model of the era.
1930 Cadillac V-16 — developed at the height of the vintage era, the V16-powered Cadillac would join Bugatti's Royale as the most legendary ultra-luxury cars of the era.

Brass or Edwardian era

Named for the widespread use of brass in the United States, the Brass, or Edwardian era lasted from roughly 1905 through to the beginning of World War I in 1914. 1905 was a signal year in the development of the automobile, marking the point when the majority of sales shifted from the hobbyist and enthusiast to the average user.

Within the 15 years that make up the Brass or Edwardian era, the various experimental designs and alternate power systems would be marginalised. Although the modern touring car had been invented earlier, it was not until Panhard et Levassor's Système Panhard was widely licensed and adopted that recognisable and standardised automobiles were created. This system specified front-engined, rear-wheel drive internal combustion engined cars with a sliding gear transmission. Traditional coach-style vehicles were rapidly abandoned, and buckboard runabouts lost favour with the introduction of tonneaus, and other less-expensive touring bodies.

Throughout this era, development of automotive technology was rapid, due in part to a huge number (hundreds) of small manufacturers all competing to gain the world's attention. Key developments included electric ignition system (by Robert Bosch, 1903), independent suspension, and four-wheel brakes (by the Arrol-Johnston Company of Scotland in 1909). Leaf springs were widely used for suspension, though many other systems were still in use, with angle steel taking over from armored wood as the frame material of choice. Transmissions and throttle controls were widely adopted, allowing a variety of cruising speeds, though vehicles generally still had discrete speed settings, rather than the infinitely variable system familiar in cars of later eras.

Between 1907 and 1912 in the United States, the high-wheel motor buggy (resembling the horse buggy of before 1900) was in its heyday, with over seventy-five makers including Holsman (Chicago), IHC (Chicago), and Sears (which sold via catalog); the high-wheeler would be killed by the Model T.

Some examples of cars of the period included the following:

1908–1927 Ford Model T — the most widely produced and available car of the era. It used a planetary transmission, and had a pedal-based control system.
1910 Mercer Raceabout — regarded as one of the first sports cars, the Raceabout expressed the exuberance of the driving public, as did the similarly-conceived American Underslung and Hispano-Suiza Alphonso.
1910–1920 Bugatti Type 13 — a notable racing and touring model with advanced engineering and design. Similar models were the Types 15, 17, 22, and 23.

Veteran Era

In 1838, Scotsman Robert Davidson built an electric locomotive that attained a speed of 4 miles per hour (6 km/h). In England, a patent was granted in 1840 for the use of rail tracks as conductors of electric current, and similar American patents were issued to Lilley and Colten in 1847. Between 1832 and 1839 (the exact year is uncertain), Robert Anderson of Scotland invented the first crude electric carriage, powered by non-rechargeable primary cells.

In the United States, brothers Charles and Frank Duryea founded the Duryea Motor Wagon Company in 1893, becoming the first American automobile manufacturing company. However, it was Ransom E. Olds, and his Olds Motor Vehicle Company (later known as Oldsmobile) who would dominate this era of automobile production. Its large scale production line was running in 1902. Within a year, Cadillac (formed from the Henry Ford Company), Winton, and Ford were producing cars in the thousands.

Within a few years, a dizzying assortment of technologies were being produced by hundreds of producers alBy 1900, it was possible to talk about a national automotive industry in many countries, including Belgium (home to Vincke, which copied Benz; Germain, a pseudo-Panhard; and Linon and Nagant, both based on the Gobron-Brillié), Switzerland (led by Fritz Henriod, Rudolf Egg, Saurer, Johann Weber, and Lorenz Popp), Vagnfabrik AB in Sweden, Hammel (by A. F. Hammel and H. U. Johansen at Copenhagen, in Denmark, beginning around 1886), Irgens (starting in Bergen, Norway, in 1883, but without success), Italy (where FIAT started in 1899), and as far afield as Australia (where Pioneer set up shop in 1898 (with an already archaic paraffin-fuelled centre-pivot-steered wagon). Meanwhile, the export trade had begun to be global, with Koch exporting cars and trucks from Paris to Tunisia, Egypt, Iran, and the Dutch East Indies.

Innovation was rapid and rampant, with no clear standards for basic vehicle architectures, body styles, construction materials, or controls. Many veteran cars use a tiller, rather than a wheel for steering, for example, and most operated at a single speed. Chain drive was dominant over the modern drive shaft, and closed bodies were extremely rare.

On 5 November 1895, George B. Selden was granted a United States patent for a two-stroke automobile engine (U.S. Patent 549,160). This patent did more to hinder than encourage development of autos in the USA. Selden licensed his patent to most major American auto makers, collecting a fee on every car they produced. The Studebaker brothers, having become the world's leading manufacturers of horse-drawn vehicles, made a transition to electric automobiles in 1902, and gasoline engines in 1904, but they continued to build horse-drawn vehicles until 1919. In 1908, the first South American automobile was built in Peru, the Grieve.

Throughout the veteran car era, however, automobiles were seen as more of a novelty than a genuinely useful device. Breakdowns were frequent, fuel was difficult to obtain, roads suitable for travelling were scarce, and rapid innovation meant that a year-old car was nearly worthless. Major breakthroughs in proving the usefulness of the automobile came with the historic long-distance drive of Bertha Benz in 1888, when she traveled more than 80 kilometres (50 mi) from Mannheim to Pforzheim, to make people aware of the potential of the vehicles her husband, Karl Benz, manufactured, and after Horatio Nelson Jackson's successful trans-continental drive across the United States in 1903.


All over the western world. Steam, electricity and petrol/gasoline-powered automobiles competed for decades, with petrol/gasoline internal combustion engines achieving dominance in the 1910s. Dual- and even quad-engine cars were designed, and engine displacement ranged to more than a dozen litres. Many modern advances, including gas/electric hybrids, multi-valve engines, overhead camshafts, and four-wheel drive, were attempted, and discarded at this time.

Early Automobiles

  • Steam Automobiles

Ferdinand Verbiest, a member of a Jesuit mission in China, built the first steam-powered vehicle around 1672, designed as a toy for the Chinese Emperor, it being of small scale and unable to carry a driver or passenger but, quite possibly, the first working steam-powered vehicle ('auto-mobile').Steam-powered self-propelled vehicles are thought to have been devised in the late 18th century. Nicolas-Joseph Cugnot demonstrated his fardier à vapeur, an experimental steam-driven artillery tractor, in 1770 and 1771. Cugnot's design proved to be impractical and his invention was not developed in his native France, the centre of innovation passing to Great Britain. By 1784, William Murdoch had built a working model of a steam carriage in Redruth, and in 1801 Richard Trevithick was running a full-sized vehicle on the road in Camborne.[4] Such vehicles were in vogue for a time, and over the next decades such innovations as hand brakes, multi-speed transmissions, and better steering developed. Some were commercially successful in providing mass transit, until a backlash against these large speedy vehicles resulted in passing a law, the Locomotive Act, in 1865 requiring self-propelled vehicles on public roads in the United Kingdom be preceded by a man on foot waving a red flag and blowing a horn. This effectively killed road auto development in the UK for most of the rest of the 19th century, as inventors and engineers shifted their efforts to improvements in railway locomotives. The law was not repealed until 1896, although the need for the red flag was removed in 1878.

In Russia in the 1780s, Ivan Kulibin started working on a human-pedalled carriage with a steam engine. He finished working on it in 1791. Some of its features included a flywheel, brake, gearbox, and bearing, which are also the features of a modern automobile. His design had three roadwheels. Unfortunately, as with many of his inventions, the government failed to see the potential market and it was not developed further.

The first automobile patent in the United States was granted to Oliver Evans in 1789. In 1805, Evans demonstrated his first successful self-propelled vehicle, which not only was the first automobile in the USA, but was also the first amphibious vehicle, as his steam-powered vehicle was able to travel on roadwheels on land, and via a paddle wheel in the water.

Among other efforts, in 1815, a professor at Prague Polytechnich, Josef Bozek, built an oil-fired steam car and Walter Hancock, builder and operator of London steam buses, in 1838 built a four-seat steam phaeton.

  • Electric Automobiles


In 1838, Scotsman Robert Davidson built an electric locomotive that attained a speed of 4 miles per hour (6 km/h). In England, a patent was granted in 1840 for the use of rail tracks as conductors of electric current, and similar American patents were issued to Lilley and Colten in 1847. Between 1832 and 1839 (the exact year is uncertain), Robert Anderson of Scotland invented the first crude electric carriage, powered by non-rechargeable primary cells.

Poineer Inventors of Automobiles

German engineer Karl Benz, inventor of numerous car-related technologies, is generally regarded as the inventor of the modern automobile. The four-stroke petrol (gasoline) internal combustion engine that constitutes the most prevalent form of modern automotive propulsion is a creation of German inventor Nikolaus Otto. The similar four-stroke diesel engine was also invented by a German, Rudolf Diesel. The hydrogen fuel cell, one of the technologies hailed as a replacement for gasoline as an energy source for cars, was discovered in principle by yet another German, Christian Friedrich Schönbein, in 1838. The battery electric car owes its beginnings to Hungarian Ányos Jedlik, inventor of the electric motor, and Gaston Planté, who invented the lead-acid battery in 1859.

Automobile History

The history of the automobile begins as early as 1769, with the creation of steam-powered automobiles capable of human transport. In 1806, the first cars powered by internal combustion engines running on fuel gas appeared, which led to the introduction in 1885 of the ubiquitous modern gasoline- or petrol-fueled internal combustion engine. Cars powered by electricity briefly appeared at the turn of the 20th century but largely disappeared from commonality until the turn of the 21st century, when interest in low- and zero-emissions transportation was reignited. As such, the early history of the automobile can be divided into a number of eras based on the prevalent method of automotive propulsion during that time. Later periods were defined by trends in exterior styling and size and utility preferences.

Automobiles-General Info

An automobile, motor car or car is a wheeled motor vehicle used for transporting passengers, which also carries its own engine or motor. Most definitions of the term specify that automobiles are designed to run primarily on roads, to have seating for one to eight people, to typically have four wheels, and to be constructed principally for the transport of people rather than goods.However, the term automobile is far from precise, because there are many types of vehicles that do similar tasks.
There are approximately 600 million passenger cars worldwide (roughly one car per eleven people). Around the world, there were about 806 million cars and light trucks on the road in 2007; they burn over 1 billion m³ (260 billion US gallons) of gasoline and diesel fuel yearly. The numbers are increasing rapidly, especially in
China and India.